Contact
Home
/
Services
/
In-Line Inspection
03Pipeline & Process

See every kilometre.

Baseline and in-service in-line inspection: geometric and caliper surveys, magnetic flux leakage and cable-free self-propelling tools for lines that are hard to pig.

01
Caliper, MFL and SPT tools
02
Diameters 6” to 56”
03
Lengths from 100 m to 100 km
Scroll
Overview

Geometric deviations of the pipe bore are physical defects with a serious impact on safe operation and pipeline life.

Dents affect the safe operation of a pipeline: they disturb the flow of the transported medium and tend to create spot formations of sedimentation, turbulence, erosion, corrosion and hydrates.

In-line inspection establishes a baseline and tracks condition over time, with tools including caliper with navigation unit, MFL, UT, EMAT and cable-free self-propelling tools.

03
In-Line Inspection
Capabilities

The right tool for the line.

From a geometry baseline to metal-loss detection, including lines with no product flow or no traps.

01↗

Geometrical / caliper survey

Detects dents, ovalities and bore deviations that threaten safe operation.

02↗

Magnetic flux leakage (MFL)

Identifies girth welds, valves, tees and offtakes, diameter changes, bends, ovalities, dents and wrinkles.

03↗

Self-propelling tools (SPT)

Cable-free tools for lines with no product or low flow, no launcher or receiver trap, and risers.

04↗

Baseline survey

A first full record of the line’s geometry and condition to compare future runs against.

05↗

Tool range

Caliper with navigation unit, MFL, UT, EMAT and cable-free self-propelling tools.

06↗

Wide coverage

Diameters between 6” and 56”, and lengths from 100 m to 100 km.

How we deliver

From piggability to data.

A staged approach reduces the risk of a stuck tool and improves the quality of what comes back.

Step 01

Assess the line

Review the route, bends, valves and traps for tool passage.

Step 02

Prepare

Clean and gauge so the tool can pass and record good data.

Step 03

Run the tool

Caliper, MFL or self-propelling tools selected for the line.

Step 04

Report

Findings delivered to support integrity decisions.

Where it applies
Unpiggable linesLow or no flowLines without trapsRisersBaseline surveysRe-inspection
From the field

Related insights.

Practical notes from KARR engineers on in-line inspection.

All in-line inspection insights →
Start a conversation

Need to know what’s inside?

Tell us the diameter, length and operating conditions. We will recommend the inspection approach that fits.

Next service
Nitrogen Services
→